Testbook Logo
Exams SuperCoaching Test Series Skill Academy
More
English
Hindi

Question

Download Solution PDF

A rivet is specified by

This question was previously asked in
UKPSC JE Mechanical 2013 Official Paper I
Download PDF Attempt Online
View all UKPSC JE Papers >
  1. shank diameter
  2. type of load
  3. length of rivet
  4. None of these

Answer (Detailed Solution Below)

Option 1 : shank diameter
Free Tests
View all Free tests >
Free
UKPSC JE CE Full Test 1 (Paper I)
1.8 K Users
180 Questions 360 Marks 180 Mins
Start Now

Detailed Solution

Download Solution PDF

Explanation:

Rivet

  • Rivets are used as fasteners for making permanent joints of two or more pieces of metals.
  • Rivets are made of mild steel or wrought iron and comprise head, tail, and shank.
  • The rivet is specified by the diameter of its shank.

 rivet

Download Solution PDF
Latest UKPSC JE Updates

Last updated on Mar 26, 2025

-> UKPSC JE Notification for 2025 will be out soon!

-> The total number of vacancies along with application dates will be mentioned in the notification.

-> The exam will be conducted to recruit Junior Engineers through Uttarakhand Public Service Commission. 

-> Candidates with an engineering diploma in the concerned field are eligible. 

-> The selection process includes a written exam and document verification. Prepare for the exam with UKPSC JE Previous Year Papers.

More Riveted Joint Questions

Q1.A single riveted lap joint is made in 10 mm thick plates with 20 mm diameter rivets. Determine the bearing strength of the rivet if stresses in bearing is 150 MPa.
Q2.To evaluate the shear strength of a rivet material, a tensile test was done with a 20 mm diameter rivet in a configuration as shown in figure. At 8.8 kN, the rivet shears off. The ultimate shear strength of the rivet material is?
Q3.Rivets are made of 
Q4.In case of a rivetted joint, the tearing resistance (Pt) g the plate across the row of rivets, when p = pitch of the rivets, d = diameter of the rivet hole, t = thickness of the plate and the permissible tensile strength (σ) for the plate material, is given by:
Q5.The strength of a riveted joint would be _______. 
Q6.The given figure shows: 
Q7.In order to avoid tearing off the plate at an edge, the distance from the centre of the rivet hole to the nearest edge of the plate (i.e. margin) should be where d = diameter of rivet hole in mm.
Q8.According to Unwin's formula, the relation between diameter of rivet hole d and thickness of plate t is given by where d and t are in mm.
Q9.If the tearing efficiency of a riveted joints 70%, then the ratio of diameter to the pitch is
Q10.Of the following rivet heads, which one has a cone-shaped frustum connected to the shank?

More Welded, Riveted and Bolted Joints Questions

Q1.A single riveted lap joint is made in 10 mm thick plates with 20 mm diameter rivets. Determine the bearing strength of the rivet if stresses in bearing is 150 MPa.
Q2.Root opening of a Single Vee groove weld joint of plate thickness "t" is
Q3.Which of the following is FALSE for bolted joints?
Q4.A fillet welded joint is subjected to transverse loading F as shown in the figure. Both legs of the fillets are of size h and the weld length is l. The average shear stress on the throat area is
Q5.To evaluate the shear strength of a rivet material, a tensile test was done with a 20 mm diameter rivet in a configuration as shown in figure. At 8.8 kN, the rivet shears off. The ultimate shear strength of the rivet material is?
Q6.Rivets are made of 
Q7.In case of a rivetted joint, the tearing resistance (Pt) g the plate across the row of rivets, when p = pitch of the rivets, d = diameter of the rivet hole, t = thickness of the plate and the permissible tensile strength (σ) for the plate material, is given by:
Q8.The strength of a riveted joint would be _______. 
Q9.The given figure shows: 
Q10.The tensile strength of the welded joint for double fillet is where s = leg or size of the weld, l = length of the weld and σt = allowable tensile stress for weld metal.
Suggested Test Series
View All >
UKPSC RO ARO Mock Tests Series 2025
105 Total Tests with 3 Free Tests
Start Free Test
UKSSSC Group C (Patwari/Lekhpal/VDO/VPDO) Test Series 2025
148 Total Tests with   3 Free Tests
Start Free Test

More Design of Machine Elements Questions

Q1.The S-N curve in fatigue testing shows the relationship between:
Q2.What will be the average pressure in plate clutch when the axial force is 4 kN. The inside radius of the contact surface is 50 mm and the outside radius is 100 mm. Assume uniform wear. 
Q3.In case of a flat pivot bearing, which of the following options is correct about the sliding friction? 
Q4.The bearing surface provided at any position along the shaft (but not at the end of the shaft) to carry the axial thrust, is known as ____________. 
Q5.What will be the power lost in friction assuming uniform pressure theory, when a vertical shaft of 100 mm diameter rotating at 150 r.p.m. rests on a flat end foot step bearing? The coefficient of friction is equal to 0.05 and the shaft carries a vertical load of 15 KN.
Q6.A bearing is designated by the number 410. It means that it is a bearing of:
Q7.Which of the following elements is not used as a roller in roller bearings?
Q8.In 6 × 19 designation of wire rope, the numbers of 6 and 19 represent :
Q9.Which of the following statements related to rope drives is INCORRECT?  
Q10.Under steady state operation of a cone clutch, if semi-cone angle (α) decreases then _____________.
Important Exams
Super Coaching
Exams
Test Series
Previous Year Papers
Objective Questions
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
[email protected]
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Our Apps
Follow us on
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Get Free Access Now
Hot Links： teen patti 50 bonus teen patti star login teen patti real cash apk teen patti apk download